This set of inspection steps for dehydration filter press is enough!

- Apr 29, 2020-

XMZD800-UB.jpg

One. Replace hydraulic oil

Due to long working hours, the hydraulic oil will deposit impurities in the inner wall of the hydraulic system due to wear and tear in the oil tank. Therefore, in order to use it normally next time, we need to replace the hydraulic oil.


X10AZGEFQD40800-UK .jpg

Two. Filter plate handle maintenance

Since the dehydration filter press works for a long time, the operation of the filter plate handle is very frequent, which is easy to cause wear and errors. Therefore, we need to remove the filter plate piece by piece from the dehydration filter press, and carefully check the filter plate handle. Abnormalities need to be repaired immediately. Once it is found that the handle is seriously worn, a new handle needs to be replaced.


X10AZGEFQD40-800-UK.jpg

Three. Maintenance of filter plate

During the operation of the dehydration filter press equipment, the filter plate often moves back and forth repeatedly, and it will be subjected to a great pressure, which will cause problems such as breakage or wrong filter handle. Therefore, before using the dehydration filter press, it is recommended that you carefully check whether the filter plate is clean and whether the filter plate is cracked. Once an abnormality occurs, it should be repaired and replaced in time to avoid affecting the normal operation of the dehydration filter press.