Small Indoor Diaphragm Filter Press

Small Indoor Diaphragm Filter Press

The laboratory small diaphragm filter press is a laboratory-specific diaphragm filter press for small and pilot tests. The press form is divided into gas (air, inert gas) press and liquid (water, oil) press. The needs of different industries.

Product Details

Small indoor diaphragm filter press

I. Introduction

The laboratory small diaphragm filter press is a laboratory-specific diaphragm filter press for small and pilot tests. The press form is divided into gas (air, inert gas) press and liquid (water, oil) press. The needs of different industries. According to customer needs, the press components can be configured with food grade and common grade, and the control can adopt PLC and man-machine interface. For general materials, after 3-15 minutes of the diaphragm membrane, the effect of press dewatering can be fully exerted. For some special materials, a stepwise pressing method of high pressure pressing after low pressure pressing can also be used. The membrane filter plate can meet the filtration process of high-efficiency dehydration and can ensure the best filtration effect of the filter press. The diaphragm filter plate has a split type high pressure polypropylene diaphragm filter plate, an integrated high pressure polypropylene diaphragm filter plate, an embedded filter cloth high pressure polypropylene diaphragm filter plate and a rubber diaphragm filter plate.


After the end of the feeding process, the filter cake is pressed to improve the dewatering efficiency of the whole machine, add the dryness of the filter cake, reduce pollution and reduce labor. The drying process is eliminated in some processes. If the blowing operation is increased before and after pressing, the moisture content of the filter cake is further reduced.


The small diaphragm filter press has:

1. Shorten the filtering operation time.

2. The process is completed in a very short time, and the production efficiency is greatly improved.

3. Saving the consumption of operating power. In the late stage of filtration, the flow rate is small and the pressure is high.

4, diaphragm press function, complete this process in a very short time, saving power consumption.

5. Increase the degree of mud biscuits and reduce the content of mud cake. The diaphragm press presses the filter cake after the static filtration to make the structure of the filter cake rearrange, increasing the density, thereby replacing a part of the water and improving the dryness. degree.

6. Strong anti-corrosion ability, basically suitable for all solid-liquid separation operations.

7. The diaphragm filter plate has the characteristics of anti-fatigue, anti-aging and good sealing performance.


II.Interpretation of Model Type

QQ截图20181119143900_副本

1.Filter press type: X: Chamber filter press

2.Maximum filtration pressure: 10:1.0 Mpa    

3.Filtrate discharge type: M: open discharge

4.Filter plate type: G: membrane

5.Filtration area: Unit: 1㎡

6.Filter plate dimensions: Length*width: 400*400 unit: mm

7.Filter plate materials: U for reinforced PP

8.Cake washing type: B: cake unwashable


III. Technical Part

Item

Name

X10MG1/400-UB

1

Filter area(M2)

1

2

Filter pressureMPa)

≤ 1.0

3

Squeezing pressure(MPa)

≤   1.0

4

Filter temperature (℃)

-10~80

5

Total chamber volume (m3)

0.015

6

Qty of filter plate (pc)

5+2

7

External size of filter plate (mm)

400*400*50/60(mm)  

8

The thickness of the filter cake (mm)

30

9

Type of filter plate

Chamber

10

Material of filter   plate

Polypropylene type

11

Hydraulic pressing pressure (Mpa)

30

12

The effective stroke of the cylinder(mm)

150

13

Inlet hole diameter(mm)

DN40

14

Material of cylinder sleeve

27 silicon-manganese alloy seamless steel pipe

15

Material of piston rod

Quenched and tempered 45# steel with chrome

16

Material of pressing plate

Welded Q235 constructional steel

17

Material of thrust plate and supporting

Welded Q235 constructional steel

18

Material of cylinder block and supporting

Welded Q235 constructional steel

19

Material of main frame

Solid steel of Q345

20

Dimensions (L*W*H)  (mm)

1400*630*850

21

Weight (Kg)

320


IV. Filter cloth parameters

Item No.

Material

Fabric Texture

Weight
  (g/㎡)±5%

Density
  (PCS/10cm)

Thickness
  (mm)±2%
Rupture Strength
  F(N/5*20cm)
Elongation at Break(%)
Air Permeability
  (L/㎡  S)±25%




Warp±5%

Across Warp±5%


Warp±2%

Across Warp±2%

Warp

Across Warp


PP-1

PP

Plain weave

370

204

110

0.75

4166

2905

43

31.83

13.56


V. Filter plate

X400 PP Filter Plate

image002  



Details of hydraulic station

image004_副本


Hydraulic Station

image008_副本


image013_副本

image017_副本


Jiande Factory

image018_副本


Tonglu Factory

image020_副本


Inquiry