Cleaning Methods Of Filter Press

- Apr 04, 2019-

After the filter press is used, dirt will be left inside. Excessive accumulation of dirt will not only cause equipment blockage, but also lead to abnormal operation of the filter press. Therefore, it is necessary to regularly clean the filter press to ensure its internal cleanliness and smoothness. The specific cleaning methods are as follows:


1. When the filter press equipment stops running, besides shutting down the power supply, we also need to clean up the filtered parts. For the filter press equipment, the filtrate can pass through a lot of parts, and they are important parts of the equipment, so we must pay more attention when cleaning, if it is because of cleaning the filter press equipment, and the equipment is made. If it's damaged, it's not worth it.


2. When the filtrate is pumped into the equipment by the feeding pump, the first part of the flow is the filter chamber, which is made up of a piece of filter plate, so to clean the filter chamber is equivalent to cleaning the filter plate. So when we clean up the filter press equipment, the first thing we need to do is to return the push plate, loosen the filter plate piece by piece, and remove the filter cake. The key point is to clean some drainage holes on the filter plate, prevent the filter liquid from drying and depositing in these key positions, causing blockage, destroying the filter plate, and making the filter press equipment unable to work normally next time.

 

3. In addition to cleaning the filter chamber, we also need to clean the filter cloth. The filter cloth is the direct guide for separating the solid and liquid of the equipment, so the cleaning of the filter cloth is particularly important. When cleaning, it is necessary to prevent the fold of the filter cloth, to ensure that there is no blockage of the open-flow feed hole and the underflow return air, and to ensure the smooth flow of the filter press.

 

Keeping the filter press clean and unobstructed is the precondition to maintain its good operation condition and ensure its normal working efficiency. Every user should pay attention to the cleaning work. In addition, the mobile parts should be reset in time after cleaning, so as to avoid running failure.