Using Details Of Filter Press

- Apr 20, 2019-

As the saying goes, details determine success or failure. The same applies to filter presses. In the process of using the filter press, if the details are not paid attention to, the working efficiency of the filter press may be reduced in the short term. In the long run, it will cause damage to the filter press and shorten its service life.

1. When the sludge is too thick or the dry lump is left behind, it will cause the blockage of the feeding port. At this time, there is no medium between the filter plates, only the pressure of the hydraulic system itself is left, and the plate itself is very vulnerable to damage due to long-term pressure.

2. When the material is insufficient or contains inappropriate solid particles, the pressure filter itself will be too stressed to damage.

3. If the outlet of the flow is blocked by solids or the feeding valve or the outlet valve is closed when the start-up occurs, there is no leakage of pressure, so as to cause damage.

4. When the filter plate of the filter press is not cleaned up properly, sometimes the media leaks out. Once the media leaks out, the edge of the plate frame will be washed out in small ditches. The pressure of the media can not be increased due to a large amount of leakage, and mud cake can not be formed.