Waste filter press depends on your specific scrap level:
1: The hydraulic station is scrapped, and the hydraulic station can also be divided into many reasons for scrapping: the filter plate is not compacted, the pressure is not pressed, the pressure is excessive, and the oil is leaked. The general reason is that the oil line is reversed and the check valve solenoid valve is damaged. Sealing ring wear and so on, you can find the source, and replace individual parts in time to turn waste into treasure.
2: Rack damage: The frame is relatively durable. The girders are broken and deformed. They can only be replaced. Do not repair them. If an accident occurs, it will not be worth the loss.
3: filter cloth filter board scrap: it is a normal phenomenon, the model of the feed pump can be adjusted, the pressure of the hydraulic station is abnormal, and it is replaced in time. The life of the filter cloth is different because of different media, so it varies from person to person. The filter plate is damaged and can be recycled (polypropylene).