I. Introduction
As industrial waste water treatment requirements become more stringent, effective filtration increases in importance. Precious Metal Recovery, Oily Sludge Dewatering, Refinery Waste Lagoon Sludge, and Municipal Waste Water Treatment are just some examples of the applications the hard-working EA Series line of Recessed Chamber Filter Press systems can tackle.
Waste water slurry, such as metal hydroxides, alum sludge, etc., are pumped into the chambers of the filter press. Filtrate passes through the filter cloth and solids are retained. Solids collect on the cloth, forming an excellent filter cake, as if one were to intentionally pre-coat the cloth. As additional solids are pumped into the chamber, the cake continues to build until the entire chamber is full of dewatered solids. The press is then cleaned and recycled.
II. Interpretation of Model Type
1.Filter press type: X: Chamber filter press
2.Maximum filtration pressure: 10:1.0 Mpa
3.Filtrate discharge type: A: close discharge
4.Plate shifting type: Z: automated
5.Filter plate type: G: membrane
6.Filtration area: Unit: 120㎡
7.Filter plate dimensions: Length*width: 1250*1250 unit: mm
8.Filter plate materials: U for reinforced PP
9.Cake washing type: K: cake washable
III. Technical Part
Item | Name | X10AZG120/1250-UK |
1 | Filter area(M2) | 120 |
2 | Filter pressure(MPa) | ≤ 0.6 |
3 | Squeezing pressure(MPa) | ≤ 1.0 |
4 | Filter temperature (℃) | -10~80 |
5 | Total chamber volume (m3) | 1.889 |
6 | Qty of filter/membrane plate (pc) | 23/24+1 head+ 1end |
7 | External size of filter/membrane plate (mm) | 1500*1500*65/70 |
8 | Designed depth of chamber(mm) | 30 |
9 | Type of filter plate | Chamber membrane |
10 | Material of filter plate | Polypropylene+elastomer type |
11 | The max hydraulic protection pressure (Mpa) | 29 |
12 | The max hydraulic pressing pressure (Mpa) | 25 |
13 | The max effective stroke of the cylinder(mm) | 750 |
14 | The diameter of cylinder(mm) | 320 |
15 | Inlet hole diameter(mm) | DN100 |
16 | Liquid outlet hole diameter(mm) | DN65 |
17 | Material of cylinder sleeve | 27 silicon-manganese alloy seamless steel pipe |
18 | Material of piston rod | Quenched and tempered 45# steel with chrome |
19 | Material of pressing plate | Welded Q235 constructional steel |
20 | Material of thrust plate and supporting | Welded Q235 constructional steel |
21 | Material of cylinder block and supporting | Welded Q235 constructional steel |
22 | Material of main frame | Solid steel of Q345 |
23 | The length of main frame (mm) | 6245 |
24 | Dimensions (L*W*H) (mm) | 7860*1700*1650 |
25 | Weight (Kg) | 12090 |
IV. Filter cloth parameters
Item No. | Material | Fabric Texture | Weight | Density | Thickness | Rupture Strength | Elongation at Break(%) | Air Permeability | |||
Warp±5% | Across Warp±5% | Warp±2% | Across Warp±2% | Warp | Across Warp | ||||||
PP-7 | PP | Twill | 580 | 551 | 190 | 1.07 | 8330.75 | 2153.25 | 34.17 | 33.37 | 16.21 |
V. Filter plate
X1250 PP Filter Plate
X1250 PP Membrane filter plate
PLC Electric control cabinet
Hydraulic station
Jiande Factory
Tonglu Factory