Small indoor diaphragm filter press
I. Introduction
The laboratory small diaphragm filter press is a laboratory-specific diaphragm filter press for small and pilot tests. The press form is divided into gas (air, inert gas) press and liquid (water, oil) press. The needs of different industries. According to customer needs, the press components can be configured with food grade and common grade, and the control can adopt PLC and man-machine interface. For general materials, after 3-15 minutes of the diaphragm membrane, the effect of press dewatering can be fully exerted. For some special materials, a stepwise pressing method of high pressure pressing after low pressure pressing can also be used. The membrane filter plate can meet the filtration process of high-efficiency dehydration and can ensure the best filtration effect of the filter press. The diaphragm filter plate has a split type high pressure polypropylene diaphragm filter plate, an integrated high pressure polypropylene diaphragm filter plate, an embedded filter cloth high pressure polypropylene diaphragm filter plate and a rubber diaphragm filter plate.
After the end of the feeding process, the filter cake is pressed to improve the dewatering efficiency of the whole machine, add the dryness of the filter cake, reduce pollution and reduce labor. The drying process is eliminated in some processes. If the blowing operation is increased before and after pressing, the moisture content of the filter cake is further reduced.
The small diaphragm filter press has:
1. Shorten the filtering operation time.
2. The process is completed in a very short time, and the production efficiency is greatly improved.
3. Saving the consumption of operating power. In the late stage of filtration, the flow rate is small and the pressure is high.
4, diaphragm press function, complete this process in a very short time, saving power consumption.
5. Increase the degree of mud biscuits and reduce the content of mud cake. The diaphragm press presses the filter cake after the static filtration to make the structure of the filter cake rearrange, increasing the density, thereby replacing a part of the water and improving the dryness. degree.
6. Strong anti-corrosion ability, basically suitable for all solid-liquid separation operations.
7. The diaphragm filter plate has the characteristics of anti-fatigue, anti-aging and good sealing performance.
II.Interpretation of Model Type
1.Filter press type: X: Chamber filter press
2.Maximum filtration pressure: 10:1.0 Mpa
3.Filtrate discharge type: M: open discharge
4.Filter plate type: G: membrane
5.Filtration area: Unit: 1㎡
6.Filter plate dimensions: Length*width: 400*400 unit: mm
7.Filter plate materials: U for reinforced PP
8.Cake washing type: B: cake unwashable
III. Technical Part
Item | Name | X10MG1/400-UB |
1 | Filter area(M2) | 1 |
2 | Filter pressure（MPa） | ≤ 1.0 |
3 | Squeezing pressure（MPa） | ≤ 1.0 |
4 | Filter temperature (℃) | -10~80 |
5 | Total chamber volume (m3) | 0.015 |
6 | Qty of filter plate (pc) | 5+2 |
7 | External size of filter plate (mm) | 400*400*50/60(mm) |
8 | The thickness of the filter cake （mm） | 30 |
9 | Type of filter plate | Chamber |
10 | Material of filter plate | Polypropylene type |
11 | Hydraulic pressing pressure (Mpa） | 30 |
12 | The effective stroke of the cylinder（mm） | 150 |
13 | Inlet hole diameter（mm） | DN40 |
14 | Material of cylinder sleeve | 27 silicon-manganese alloy seamless steel pipe |
15 | Material of piston rod | Quenched and tempered 45# steel with chrome |
16 | Material of pressing plate | Welded Q235 constructional steel |
17 | Material of thrust plate and supporting | Welded Q235 constructional steel |
18 | Material of cylinder block and supporting | Welded Q235 constructional steel |
19 | Material of main frame | |
20 | Dimensions (L*W*H) (mm) | 1400*630*850 |
21 | Weight (Kg) | 320 |
IV. Filter cloth parameters
Item No. | Material | Fabric Texture | Weight | Density | Thickness （mm）±2% | Rupture Strength F(N/5*20cm) | Elongation at Break(%) | Air Permeability （L/㎡ S）±25% | |||
Warp±5% | Across Warp±5% | Warp±2% | Across Warp±2% | Warp | Across Warp | ||||||
PP-1 | PP | Plain weave | 370 | 204 | 110 | 0.75 | 4166 | 2905 | 43 | 31.83 | 13.56 |
V. Filter plate
X400 PP Filter Plate
Details of hydraulic station
Hydraulic Station
Jiande Factory
Tonglu Factory
